Industry News
RM Pressure Sensor---10/21/2009
RM pressure sensor is designed to be installed in the pump outlet, and other traditional 'appear / disappear' detectors, stator temperature probes and other interfering devices On the contrary, it is considered to prevent the pump to run interference with the most effective way.
displacement pump at the same time is considered to function, one of the most comprehensive pump design, which has these advantages: it can minimize wear and tear, to deal with abrasive fluids; accurate measurement of viscous liquids; and delivery highly sensitive products, their main limitations (as the majority of pump products) is subject to the threat of running dry. However, for users, in the dry operating conditions or high / low pressure conditions, the use of RM pressure sensor is to protect their displacement pump or other processing equipment, one of the most effective method.
The device consists of sensors, pressure switches and control box are three basic components. This sensor is installed in between two standard ANSI flange that allows fluid lanes. Detecting the pressure of the entire pipeline system to ensure that housing, fixed installations or jumper does not affect the pressure readings. There is also a feature of it is a fluid-filled pressure gauge can be visual to the entire pump pressure of the situation within the system.
displacement pump at the same time is considered to function, one of the most comprehensive pump design, which has these advantages: it can minimize wear and tear, to deal with abrasive fluids; accurate measurement of viscous liquids; and delivery highly sensitive products, their main limitations (as the majority of pump products) is subject to the threat of running dry. However, for users, in the dry operating conditions or high / low pressure conditions, the use of RM pressure sensor is to protect their displacement pump or other processing equipment, one of the most effective method.
The device consists of sensors, pressure switches and control box are three basic components. This sensor is installed in between two standard ANSI flange that allows fluid lanes. Detecting the pressure of the entire pipeline system to ensure that housing, fixed installations or jumper does not affect the pressure readings. There is also a feature of it is a fluid-filled pressure gauge can be visual to the entire pump pressure of the situation within the system.
