Products knowledge
- 4Ball valve replace butterfly valve and gate valve [2009-10-9]
Two-bq eccentric and a half ball, the ball was carefully weighed, Butterfly Valve, gate valves and many premise of the strengths and weaknesses, learn from Ge - 4The Application of gate valve [2009-10-9]
A Gate Valve, or Sluice Valve, as it is sometimes known, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. They are so-named because the part that either stops or allows flow through the valve acts somewhat like a gate. The gat - 4 About using of knife gate valve [2009-10-10]
1. Must inspect the valves cave and sealing surface before installation. Not allowed the dirt or sand attachment.
2. Bolts connect with every position should be uniform tightened.
3. Check the packing assembly
- 4The principle of check valve's working [2009-10-10]
Check valve allow medium to flow in one direction only, stop medium which flow in opposite direction .usually these valve work automatically. Under the action of pressure of fluid which
- 4gate Valve types and uses [2009-10-12]Gate valve is closed parts (ram) along the channel center line perpendicular to the direction of movement of the valve. Gate valve in the pipeline used mainly for cutting.
G- 4Asia valve seminar papers assess the [2009-10-13]
globe valve,butterfly valve,gate valve,check valve,ball valve and plug valve is all the best valves.- 4Our company insists on the target [2009-3-30]
Our company insists on the target ...- 4globe valve [2009-10-19]
1, increasing rigidity
of the oscillations and a slight vibration, can increase the stiffness to eliminate or reduce, such as the large selection of spring stiffness in favor of implementing agencies such as the piston approaches are feasible.
£ £
2, to increas- 4gate valve and check valve works [2009-10-19]
Abstract: installed at the pump outlet pipe on the new multi-function pump control valve also has gate valve, check valve, water hammer eliminator three f- 4angle globe valve [2009-10-19]
Angle globe valve sealed valves are mandatory, so the valve is closed, we must put pressure on the valve flap in order to force the sealing surface does not leak. When the medium from the bottom- 4wafer check valve [2009-10-19]
Wafer check valve drive is to use external power open and close needle-valve device. The purpose of using the drive is to make effort to facilitate the operation of the valve İp fast and reliable, or to achieve automatic c- 4Method of control valve maintenance [2009-10-19]
Routine maintenance on vehicles, air filter and pressure control valve PCV easily be ignored. Moreover, often when they are threatening to the engine block and the normal working hours, will it be too late as the replacement of maintenance. In order to avoid premature engiAll32piece Current:1Page/All3PageFirst Back Next LastTel:+86-21-62954829 Fax:+86-21-62957830 mail:sales@king-valve.com
Copyright king-valve.com 1995-2009,Qiuyi Valve .,Ltd, All Rights Reserved
Sitemap | XML Sitemap | Set Index |
links:ball valve,gate valve,globe valve,butterfly valve,check valve - 4Asia valve seminar papers assess the [2009-10-13]