Current position:Home>>Products>>hydraulic control valve>>Tiny Drag Slow Shut Check Valv
Tiny Drag Slow Shut Check Valv
Micro-Slow Close Check Valve Check the latest in the national product, novel structure, good performance, micro-Slow Close Check Valve main features are as follows: 1, small size, light weight, structure, length of only Swing Check Valve about one-third. 2, slow closed system: excellent performance without the impact of media pipeline, the valve plate first, fast open, slow closing, to prevent damaging water hammer. 3, rubber, soft-sealed, closed performance, wear resistance and long service life. 4, rubber slow Wei, open and close smoothly, no vibration, no noise. 5, than the old-fashioned valve flow resistance is small, there are significant energy-saving effect.
Micro-Slow Close Check Valve Note: 1, adjustable relief valve at the top of a closed valve is used to adjust the slow closing time, use the process, we need to protect and, if damaged must be promptly replaced. 2, check valve of the hydraulic system to keep clean, add hydraulic oil has to go through more than 120 oil filter head, grades for the YA-N68. 3, regular inspection to add hydraulic oil, generally depending on the particular circumstances, three to six months of additional time (fill up). 4, when the oil came from a pool of hydraulic oil off, there will be not in place to affect the piston out slowly closed the case if it is found to replenish hydraulic oil. 5, do not slow closure device, as long as the oil tank hydraulic oil can be released. Micro-Slow Close Check Valve Technical parameters: 1, slow closing time: 60 seconds following any adjustment needed. 2, water hammer peak: In the nominal pressure of 1.5 times. 4, medium temperature :0-85 ¡æ. 5, applicable media: water, source water, sewage, water and so on.
NO PRODUCTS!Micro-Slow Close Check Valve Note: 1, adjustable relief valve at the top of a closed valve is used to adjust the slow closing time, use the process, we need to protect and, if damaged must be promptly replaced. 2, check valve of the hydraulic system to keep clean, add hydraulic oil has to go through more than 120 oil filter head, grades for the YA-N68. 3, regular inspection to add hydraulic oil, generally depending on the particular circumstances, three to six months of additional time (fill up). 4, when the oil came from a pool of hydraulic oil off, there will be not in place to affect the piston out slowly closed the case if it is found to replenish hydraulic oil. 5, do not slow closure device, as long as the oil tank hydraulic oil can be released. Micro-Slow Close Check Valve Technical parameters: 1, slow closing time: 60 seconds following any adjustment needed. 2, water hammer peak: In the nominal pressure of 1.5 times. 4, medium temperature :0-85 ¡æ. 5, applicable media: water, source water, sewage, water and so on.
